Airport Information Window
Previous  Top  Next

TeleType GPS can display a large amount of information about each airport in the database. Double click/press on an airport runway and select Info from the pop-up menu to see the Airport Info window. The buttons with "Rwy" on their labels show information about the currently selected runway. Other buttons request airport information.

ppc_aviation_airportinfo
Select an airport runway to bring up information about the airport. (PDA)


ppc_aviation_arptinfo_rwyinfo
Rwy Info
Displays information about the highlighted runway. For each runway at an airport the program will display the elevation of both ends of the runway, the slope, TDZE (Touchdown Zone Elevation), length for landing and takeoff, latitude & longitude position for the high and low runway identifier number ends of the runway, and the pavement type.


ppc_aviation_arptinfo_ILS

Rwy ILS
Displays the type and radio frequency of the ILS for the highlighted runway.
ppc_aviation_arptinfo_rwylight
Rwy Light
Displays the information related to the runway lights for the selected runway.


ppc_aviation_arptinfo_arptcomm
Arpt Comm
Displays all of the radio frequencies used to communicate with the airport.
ppc_aviation_arptinfo_arptnav
Arpt Nav
Shows the information on the airport's navigation beacon.


ppc_aviation_arptinfo_fuel

Fuel Info
Information about what fuel is available at the selected airport.
clip0014

Extend Rwy / Clear Rwy – Extends the center line of the selected runway in both directions for many miles. This will help you align your flight path with the runway. The extended runway will be a pink line running through the selected runway. The Extend Rwy button will change to Clear Rwy when the extended runway is displayed. To clear the extended lines select any airport and press Clear Rwy.


Add to WP – This will add a waypoint of this airport to the default waypoint file. This waypoint can be used in a flight route or as a reference point on the map.


OK - Closes this window.