|
Care and Maintenance
|
Previous Top |
| · | Keep this and all accessories out of small children's reach.
|
| · | Keep your Bluetooth GPS receiver dry. Do not expose to rain, water, or high humidity environments. Humidity, liquids, and precipitation contain minerals that will corrode its connectors, jacks, plugs, and electronic circuit boards.
|
| · | Use only the supplied and approved accessories. Unauthorized accessories, antenna, modifications or attachments could damage the Bluetooth GPS receiver, and may violate regulations governing radio devices.
|
| · | Only use the charger supplied for charging purposes. Use any other charger may damage the Bluetooth GPS receiver and even run the risk of leaking batteries or explosion.
|
| · | Use a dry, clean soft cloth to clean the unit. Do not use harsh cleaning solvents, chemicals, or strong detergents.
|
| · | Do not drop, shake, or knock the Bluetooth GPS receiver. Rough handling can break the connector, jack, and internal electronic circuit boards. This will cause non-recoverable damages to the product.
|
| · | Do not store the Bluetooth GPS receiver in dusty, dirty areas. Its moving parts, like connector pins and clips, can be damaged.
|
| · | Do not store the Bluetooth GPS receiver in hot area. High temperatures can shorten the life of electronic devices, and melt or drape certain plastics.
|
| · | Do not expose your TeleType Bluetooth GPS Receiver to temperatures higher than 158°F (70°C). Do not leave your Bluetooth GPS receiver in your car under direct sunlight while not in use.
|
| · | Do not store the Bluetooth GPS receiver in cold temperatures. When the unit warms up to its normal operational temperature, moisture can aggregate inside it, severely damaging the electronic circuit boards inside.
|
| · | Do not attempt to open the Bluetooth GPS receiver. Unauthorized handling may damage the unit, and void your warranty.
|
| · | Do not paint on the Bluetooth GPS receiver.. Paint can clog the connector, jack, and prevent proper normal operation of the unit.
|