Editing a Trip

Editing a Trip

Previous Top Next

To Edit a Trip

Steps:

1. Make sure that the trip you want to edit is loaded. If the appropriate trip is not loaded, refer to the Loading a Trip section in this manual.

2. After your Trip is loaded, go to the Marine menu and click on Plan/Edit Trip.

3. The Trip Planner Window will come up the screen. At this window, you can perform the following operations.

Trip Planner Window

·	Add - Adds the selected waypoint to your Trip.

·	Remove - Removes the selected waypoint from your Trip.

·	Save - Saves the Trip.

·	Clear All - Deletes the Trip.

·	Current Location - Provides you with the current location's information. This information is displayed in the Trip Planner Window alongside the rest of the waypoints. Note: This feature requires your position to be fixed.

·	Up - Moves the selected waypoint up one.

·	Down - Moves the selected waypoint down one.

·	Reverse - Reverses the order of your trip.

·	Print - prints the information (waypoint number, bearing, and distance) about your Trip.

4. After all the changes are made, click Save to save those changes to the Trip file.