Connection
Previous  Top  Next

Connecting Your Bluetooth Device:

bt2
Begin by selecting
Start -> Bluetooth Manager.
Once in the program,
select New -> Connect!
bt3
Select Explore A Bluetooth device to see what Bluetooth device you currently have selected.
bt4
You will see the above screen, showing that you do not have a Bluetooth device selected. Click on Next.
bt5
You will see a device named TeleType. Please click on this device. It will select this device as your Bluetooth Browser.
bt6
You must select SPP slave -> Next.
bt7
Your next screen will confirm your selection. Please select Finish.
bt8
Once you get this screen, tap and hold on the TeleType icon, and select Connect.
bt9
You will see a screen showing that a connection process, and the resulting screen will appear this way.
You are now connected!



Verifying Your Connection:
bt10
Once you have completed the setup of your Bluetooth device, you may check to see if your TeleType GPS software is attempting to fix your position. You can do this by opening your GPS software, and selecting Tools -> GPS Status. Go to the Status tab, and click on Find GPS Port. Shortly, you will see the GPS code running as in the picture above. This signifies that your Bluetooth device is functioning properly.