Q: My Bluetooth host device is asking me for a passkey. What is it?
A: It is "6268".
Q: The TeleType software doesn't seem to be making any connections with my Bluetooth GPS receiver. How do I make it work?
A: You will need to make sure your PDA is paired with the Bluetooth device. Follow the instructions in the Connection section to make sure that your PDA is recognizing the Bluetooth GPS receiver properly. If so, you will need to connect with the device by going to the Bluetooth Manager and double-tapping on the TeleType icon.
Q: My Bluetooth receiver seems to be connecting to satellites, but I am unable to establish a connection between the receiver and my PDA. How can I make a connection?
A: Go to the Bluetooth Manager on your PDA. Locate the "TeleType: SPP Slave" icon and tap and hold. A pop-up menu will appear, select Delete.
Next, locate the Reset button on your Bluetooth GPS receiver and press it. Then perform a soft reset on your PDA.
Once your PDA has finished resetting itself, go back to the Bluetooth Manager screen and perform the typical setup and connection procedures for your Bluetooth receiver (for help with connection, please review the Connection section).
Finally, run the TeleType GPS software. Go to Tools > GPS Status > Status, select COM 8 as your port, 4800bps, and tap Open Port. You should see symbols scrolling in the gray box below.