|
Turn The Power On:
The LED that represents the Bluetooth connection is the middle Bluetooth logo icon (shown in second picture). The LED that represents the power is the left-most power icon (shown in the third picture). Switch the power of the TeleType GPS BlueTooth GPS receiver on. Make sure that the receiver is in clear view of the sky without any obstruction for better satellite acquiring. Your receiver will search for a connection to a Bluetooth device. While searching, the LED will blink once every three seconds. If the Bluetooth receiver does not detect any devices, it will turn off in five minutes. When the receiver detects a device, it will see if data transfers from the receiver to the device and the LED will blink every second. It will blink once every three seconds in the case that it is no longer transferring data, or cannot transfer data and is trying to reconnect to the device. This is described below in the status chart of the receiver. The third LED (orange), the power indicator, will glow without blinking while the receiver fixes its position. Once a position has been fixed, the orange LED will be blinking as well. |
Note: Some PDAs have to re-open Bluetooth manager for the Bluetooth device to reconnect. |