Voice Recognition

Voice Recognition

Previous Top Next

TeleType offers the unique ability to train your PDA to recognize your voice. You can choose just a few commands, or many, to be recognized.

To use the Voice Recognition function of the software, you will need to have a microphone connected to your PC, laptop, or PDA device. Laptops and PDAs usually come with a built-in microphone.

Only PC and PDA versions of the software currently support Voice Recognition.

Before you begin using voice commands, you will need to train the program to recognize the commands.

Voice Recognition tab in the Preference window. (PC)

1.	Go to View > Preference (MENU > Preferences on PDA), and select the Voice tab. For a more detailed explanation of what the features of the Voice tab are, click here.

2.	Under the section labeled Voice Recognition, check the box next to Enable.

3.	Select the Training button.

4.	Select a specific voice command that you would like to record. To see a list of possible voice commands, click here.

Select the voice command you want to record. (PC)

5.	A Record Your Voice window will appear. Press the Record button to begin recording. Record Your Voice is requested three times by the program. It takes all three recordings to average out a template for your voice. Try to record in a consistent style of voice without background noise.

Record Your Voice window. (PC)

6.   When you have finished recording, press Listen to hear your recording. If you are satisfied with the result, click / tap Close and
   select another command to record. You may record anything you like for the voice commands, and as long as you remember to pronounce the command the same way when speaking to your PC and/or PDA.

7.   When you are finished recording all desired commands, tap or click on Save to save your recordings.

On the PC, to enter toggle on/off Voice Recognition mode, press F6. On the PDA, you can configure your front buttons to toggle on/off Voice Recognition mode.

See Also:

Voice Preferences